Products

Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem

Condition:New OEM
Model:MDM6100
Manufacturer:Newtec

MDM6100 (ST Engineering) Broadcast Satellite Modem

The MDM6100 Broadcast Satellite Modem is the next-generation DVB compliant modem specifically designed for broadcast applications. The modem supports the DVB-S2 and DVB-S2X, next to the legacy DVB-S and DVB-DSNG standards in order to achieve barrier-breaking efficiency. The unit can act as a MPEG Transport Stream modulator, demodulator or modem.

As a modulator, it is best suited for broadcast direct-to-home, primary distribution to headends and contribution of television and radio content. As a modem or demodulator, it is typically installed in head-ends or at both sides of a contribution link. The MDM6100 can be used in conjunction with set-top boxes, professional Integrated Receiver Decoders (IRDs) or professional satellite demodulators.


Key Features

  • Single Transport Stream modem with optional data stream via MPE encapsulation/decapsulation
  • Baud rate range: 256 kbaud – 72 Mbaud
  • Data rates up to 216 Mbit/s
  • IF (70/140MHz) and L-Band (950-2,150MHz) high power outputs
  • Optional integrated RF upconverter (Ku-band or C-band)
  • Demodulator with dual L-Band or selectable IF-or L-band (option) input
  • Highest system reliability and service uptime through robust design and industry-leading redundancy solutions
  1. Exceptional jitter recovery on TS over IP input with SMPTE 2022 FEC
  2. Redundant optional ASI or GbE interfaces with support of redundant IP network configurations
  3. User configurable alarm table for device redundancy switching
  4. Input TS redundancy switch based upon null packet stuffing exceeding a set limit
  5. Built-in TS Analyser with
    – TR101 290 priority 1 and 2 error monitoring
    – PID table with rate and PCR jitter measurements
    – Continuity Count error monitoring per PID
  1. Receiver Non-Linear Post Compensation (NLPC 2.0) for a better link margin in case of multiple carriers per transponder, reduces intermodulation interference
  2. Accurate link margin monitoring through the use of NoDE (Noise & Distortion Estimator) tool
  3. RFI reduction using optional DVB RF Carrier ID (DVB-CID) and NIT table CID (default)
  4. Input rate recovery based upon PCR timestamps
  5. Automatic TS rate adaptation
  6. L-band monitoring output
  7. Market-leading RF purity and performance
  8. Programmable amplitude slope equalizer
  9. PRBS generator for link performance tests
  10. Output level adjust for cable loss compensation
  11. Optional high stability internal clock reference
  12. Optional dual AC power supply
  • Low Total Cost of Ownership as a result of very high bandwidth efficiency technology options, and ease of monitoring and control
  • DVB-S2X, DVB-S2, DVB-DSNG and DVB-S compliant
  • Newtec S2 Extensions
  • QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK and 256 APSK
  • Clean Channel Technology provides up to 15% bandwidth efficiency gain on top       of the DVB-S2 standard
  • Optional automated Equalink 3 predistortion provides up to 10% bandwidth
  • gains, higher QoS and geographic coverage
  • Selection of DSNG profiles acc. WBU-ISOG including the new DVB-S2X standard
  • Secure front panel, SNMP, HTTP and CLI interfaces
  • Optional PID Activity Monitoring for ECM/EMM message interruption triggering external management system
  • Optional built-in support for opportunistic data insertion up to 20 Mbps, interoperable
  • with IRDs which support Multi Protocol Encapsulation (MPE)
  • MPE decapsulator up to 20 Mbps
  • Supports SFN Networks using transparent TS pass-through
  • Optional BISS content protection
  • Demodulator supports the automated Equalink 3 calibration protocol
  • External reference input
  • Optional 10 MHz reference output
  • Easy integration with industry-leading management systems (EMS/NMS/OSS)
  • Feature-based pricing and software upgrades
  • Pay-as-you-grow flexible licensing scheme

 

Applications

  • Broadcast Direct-to-Home (DTH)
  • Broadcast primary distribution
  • Broadcast fixed contribution
  • Upgrade of distribution networks towards Newtec
  • S2 Extensions or DVB-S2X
  • Transmodulation of DVB-S/S2 to DVB-S2, DVB-S2X or Newtec S2 Extensions

 

Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem

Newtec-iDirect MDM6100 Broadcast Modem

Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem

Datasheet Newtec-iDirect MDM6100 Broadcast Satellite Modem

Newtec (ST Engineering) MDM6100 Broadcast Satellite Modem

    Walter van der Plas

    More questions about this product?

    For more information about this product, please feel free to contact us by phone, e-mail or social media!

    Call +31 (0)6 305 36 169 or Email info@sky-brokers.com