Two used Andrew Satellite Earth Station Antennas installed at the former Taliándörögd Teleport in Hungary
![Two Andrew antennas installed in Hungary](https://sky-brokers.com/wp-content/uploads/2025/01/MNSS-Project-foto-950x534.jpg)
Two used Andrew Satellite Earth Station Antennas installed at the former Taliándörögd Teleport in Hungary
In March 2024 Skybrokers was awarded a contract for the delivery and installation of two pre-owned Satellite Earth Station Antennas. A refurbed Andrew 7.3m and a 9.3m Satellite Antenna, both with new MCU/Tracking systems and RF cabling, were supplied and successfully installed and commissioned by an international project and installation group with engineers from Croatia, Macedonia and the UK. With great help from the local team, the installation was successfully finished in November 2024, at the former Taliándörögd Teleport in Hungary for an undisclosed customer.
- Taliándörögd Teleport in Hungary
- We will install two Andrew antennas.
- Foundation works were finished before.
- 9m foundation.
- Concrerte was poured and dried out.
- The Tripod Mounts were installed with a Telehandler.
- Antenna parts were unpacked and prepared..
- The 9.3m reflector panels were cleaned..
- ..by pressure wash.
- Tripod Mount was checked and prepared..
- ..and reflector was assembled.
- Reflector was built close to the foundation..
- ..to make lifting easier later on.
- Feed was installed..
- ..new motors were installed.
- The 40T crane was arranged..
- ..to start with the 9m reflector..
- ..just before the winds picking up..
- ..and lifting was not possible.
- The Team made it happen..
- ..with big help of local contractors.
- 9.3m Reflector was installed on the Tripod Mount.
- Sub Reflector installation.
- The 7.3m reflector was prepared for lifting the days before.
- Panels were installed and aligned carefully..
- ..and ready for the crane.
- ..and new motors were installed.
- The next day we could lift the 7.3m reflector.
- The crane could reach the reflector.
- Lifting straps were attached..
- ..and the reflector was lifted on the Tripod Mount.
- Lifting operations were planned before winds picked up again.
- The team made it happen..
- ..and finished assembly successfully.
- The MCU/Tracking boxes were installed.
- The MCU/Tracking boxes were installed..
- ..cabling was installed..
- ..and the MCU was tested..
- ..on both antennas.
- Andrew 7.3m ready for operation.
- MCU/Tracking box installed and tested.
- Andrew 9.3m Antenna aligned and tested.
- Antenna is ready for operation.